Product features

Subtraction Function

Multipurpose Functions

Bluetooth Interface

Product in detail

Green laser technology
DLD technology creates an extremely bright, green laser point
Point-precise measuring with laser to determine lengths exactly
The area and volume functions permit the acquisition of room sizes, for example to calculate material quantities
Addition and subtraction of lengths, areas and volumes
Min/Max continuous measurement
Digital bubble level is used to align the measuring device
Tilt sensor calibration
360° inclination sensor for determining the horizontal and vertical distance
Bluetooth interface for measurement data transfer
Measured value memory for 50 entries
2 selectable measurement reference points: front and rear
Illuminated 4-line colour LCD
Sturdy, ergonomically designed, rubberised casing

Product code: 080.837A

ACCURACY	± 2 mm (typical)**
MEASUREMENT RANGE	max. 70 m***
MINIMAL RANGE	0.05 m
LASER	Class 2 < 1mW
LASER WAVELENGTH	515 nm
FUNCTIONS	Distances, area, volume, continuous measurement, angle function 1 + 2 + 3****, digital bubble level and tilt sensor calibration, addition / subtraction of lengths, areas, volumes
UNIT (selectable)	m / inch / ft
AUTOMATIC SWITCH-OFF	30 sec laser / 3 min device
RADIO MODULE OPERATING DATA	Bluetooth LE 4.x interface; Frequency band: ISM band 2400–2483.5 MHz, 40 channels; Transmission power: max. 10 mW; Bandwidth: 2 MHz; Bit rate: 1 Mbit/s; Modulation: GFSK/FHSS
POWER SUPPLY	2 x 1.5V LR6 (AA)
OPERATING CONDITIONS	-10°C … 40°C, max. humidity 20 … 85% rH, no condensation, max. working altitude 2000 m above sea level
STORAGE CONDITIONS	-20°C … 70°C, max. humidity 80% rH
DIMENSIONS	(W x H x D) 50 mm x 122 mm x 27 mm
WEIGHT	140 g (incl. batteries)
* Approx. 6 times brighter than a typical red laser with 630 - 660 nm See operating instructions for specific accuracies * At max. 5000 lux **** In combination with 360° inclination sensor