Product features

Can be used for measurements throughout building installations

Diode test function for determining integrity and polarity

Automatic continuity tester with acoustic signal

Large backlit LCD display & rotary function knob

Product in detail

Precise measurements of voltage, current,resistance, capacitance, frequency and duty factor
Diode test function for determining integrity and polarity
Automatic range changeover and manual range preselection
Automatic continuity tester with acoustic signal
High display resolution of 4000 counts for exact determination of all measured quantities
Large measurement bandwidth for frequency measurement from 10Hz to 10KHz
Data HOLD function
CAT III-600V, CAT IV-600V – can be used for measurements throughout building installations
Impact-proof, ergonomic housing with protective rubber coating and base stand

Product code: 083.036A

DISPLAY RESOLUTION	4000 counts
INPUTS / ACCURACIES	VOLT (protected up to 600V RMS/DC, impedance 10MΩ) DCV: 0.4V ±(1.0% + 8) 4/40/400V ±(1.0% + 3), 600V ±(1.2% + 3) ACV: 4/40/400V ±(1.0% + 5), 600V ±(1.2% + 5)
OTHER	(protected up to 250V RMS/DC) DCA: 0.4mA ±(1.0% + 3), 4/40/400mA ±(1.5% + 3), 4/10A ±(2.5% + 5) ACA: 0.4mA ±(2.0% + 5), 4/40/400mA ±(2.5% + 5), 4/10A ±(3.0% + 7)
RESISTANCE	0.4kΩ ±(1.0% + 4), 4/40/400kΩ/4MΩ ±(1.5% + 2), 40MΩ ±(3.5% + 3)
CAPACITANCE	40nF ±(5.0% + 35), 400nF/4/40μF ±(3.0% + 5), 400/4000μF ±(4.0% + 5), ±(5.0% + 5)
FREQUENCY	10Hz ... 10kHz ±(1.0% + 5)
DUTY CYCLE	1% … 99% ±(1.2% + 2)
CONTINUITY TEST	Test current ≤ 0.5 mA Response threshold ≤ 50 Ohm
WEIGHT	262 g
AUTO-POWER-OFF	15 min.
OVERVOLTAGE	CAT III - 600V, CAT IV - 600V
POLLUTION DEGREE	2
POWER SUPPLY	2 x AAA 1.5 Volt batteries
FUSE	10A / 600V, flink (5 x 20 mm), 500mA / 600V flink (5 x 20 mm)
OPERATING CONDITIONS	Max. humidity 80% rH, no condensation up to 31°C, at higher levels linear derating up to 50% rH / ≤ 40°C, max. altitude 2000 m above sea level
STORAGE CONDITIONS	-20°C … 60°C, Max. humidity 80% rH
DIMENSIONS	67 x 120 x 47 mm
DIODE TEST	Test current/voltage ≤ 0.3 mA / ≤ 3.3 V